Ukrainian tow boat ‘Chelyabinsk’ collides with bridge at Baja, Hungary

Posted on June 2, 2021June 3, 2021Categories Uncategorized

Wednesday, March 17, 2021

On Monday, Ukrainian towboat “Chelyabinsk” ((uk))Ukrainian language: ??????????? ran its barge caravan into a bridge pillar on the river Danube at Baja, Hungary. The caravan broke up, but it continued its way downstream later that day. According to multiple sources, no casualties were reported.

The caravan consisted of six grain barges pushed by Chelyabinsk, a towboat of the Ukrainian Danube Shipping Company. Its downstream route crossed the rail-road bridge at Baja over the Danube at about marker 1480.

The caravan moved too far left from the navigable passage and hit a pillar of the bridge around 12:54 CET (1154 UTC) while trying to turn right. Gyula Szabó, a nautical expert interviewed by TV2, attributed the event to pilot error. An eyewitness told TV2 heavy winds were a contributing factor.

The caravan broke up after the collision. Boats anchored at Baja caught the barges. A police inspection found no leaks on them and the re-assembled caravan left the scene the same day.

Talking to RTL Klub, another helmsman, Dávid Peth?, pointed out this section is hard to navigate through with this kind of setup: “[This was] a caravan of about 200 meters in length [and] 33 meters in width with a mass, together with its cargo, of about 10 thousand metric tonnes. Keeping in mind that the horizontal clearance [under] the Baja bridge averages at only 60 metres, this is very large and very bulky.” ((hu))Hungarian language: ?Kb. 200 méteres karaván, 33 méter a szélessége, és kb. 10 000 tonna az ? tömege, így megrakottan. Ez egy hatalmas nagy méret és egy hatalmas nagy súly ahhoz képest, hogy a bajai hídnak az átlag hajózó szélessége csupán 60 méter. Peth? also told RTL Klub this bridge-crossing manoeuvre starts three kilometres upstream from the bridge, with no room for error.

No significant damage was reported on the bridge, and cross-river traffic did not halt. The police categorised the case as an administrative offence.

Retrieved from “https://en.wikinews.org/w/index.php?title=Ukrainian_tow_boat_%27Chelyabinsk%27_collides_with_bridge_at_Baja,_Hungary&oldid=4614674”

Gastric bypass surgery performed by remote control

Posted on May 31, 2021June 1, 2021Categories Uncategorized

Sunday, August 21, 2005

A robotic system at Stanford Medical Center was used to perform a laparoscopic gastric bypass surgery successfully with a theoretically similar rate of complications to that seen in standard operations. However, as there were only 10 people in the experimental group (and another 10 in the control group), this is not a statistically significant sample.

If this surgical procedure is as successful in large-scale studies, it may lead the way for the use of robotic surgery in even more delicate procedures, such as heart surgery. Note that this is not a fully automated system, as a human doctor controls the operation via remote control. Laparoscopic gastric bypass surgery is a treatment for obesity.

There were concerns that doctors, in the future, might only be trained in the remote control procedure. Ronald G. Latimer, M.D., of Santa Barbara, CA, warned “The fact that surgeons may have to open the patient or might actually need to revert to standard laparoscopic techniques demands that this basic training be a requirement before a robot is purchased. Robots do malfunction, so a backup system is imperative. We should not be seduced to buy this instrument to train surgeons if they are not able to do the primary operations themselves.”

There are precedents for just such a problem occurring. A previous “new technology”, the electrocardiogram (ECG), has lead to a lack of basic education on the older technology, the stethoscope. As a result, many heart conditions now go undiagnosed, especially in children and others who rarely undergo an ECG procedure.

Retrieved from “https://en.wikinews.org/w/index.php?title=Gastric_bypass_surgery_performed_by_remote_control&oldid=4331525”

16-year-old arrested over alleged plot to hijack US airliner

Posted on May 30, 2021May 31, 2021Categories Uncategorized

Saturday, January 26, 2008

A 16-year-old male from Novato, California has been arrested in Tennessee over allegations he intended to hijack a commercial passenger airliner in the United States.

The boy, who was unnamed due to his age, was a passenger on board Southwest Airlines Flight 284 from Los Angeles to Nashville on Tuesday, with his parents reporting him missing at 11:30 am the same day. Although he remained calm throughout the flight and made no hijacking attempt, authorities report he had handcuffs, duct tape and yarn inside the aircraft cabin with him. Although his arrest was only made public on Friday, it is reported that he was detained immediately on reaching Nashville International Airport.

George Bolds, a spokesman for the Federal Bureau of Investigation (FBI) said that the items were “suspicious” and that the boy had informed the FBI he had indeed intended to hijack the aircraft. An FBI agent told reporters that he felt the plot was ill-conceived, saying “His plan had a low probability of success.”

The FBI also conducted a search of his home on Thursday, finding in his room “a photograph of the inside of a small aircraft, something you’d find in a bookstore.”

Subsequent to his arrest he pled guilty on Friday to a “delinquent act,” according to local officials. A juvenile court judge ordered him to be returned to California for continued perusal of that charge as well as others set to be made. He is currently in Davidson County Juvenile Detention Center in Nashville.

Authorities believe that the teen was suicidal, but the FBI dismissed earlier reports alleging that he intended to crash the airliner into a Hannah Montana concert in Lafayette, Louisiana.

Retrieved from “https://en.wikinews.org/w/index.php?title=16-year-old_arrested_over_alleged_plot_to_hijack_US_airliner&oldid=4273156”

Bun And Thigh Roller Sculpt Your Body The Quick, Fun And Easy Way}

Posted on May 30, 2021May 31, 2021Categories Tenders

Bun and Thigh Roller – Sculpt Your Body the Quick, Fun and Easy Way

by

Adam Weiss

In a demanding and stressful world where time is a very valuable resource, many people simply cannot afford the luxury of spending long hours at the gym. They seek easier and faster alternatives to maintaining a fit and healthy body. If you are one of these people and you wish to sculpt your body in a quick, fun and easy way, the Bun and Thigh Roller is a great option for you!

The Bun and Thigh Roller allows you to do a wide range of physical workouts in the comfort of your own home. This amazing product can help you tighten and sculpt your buns, thighs and hips in only five minutes of daily exercise! With the Bun and Thigh Roller, you can easily work out the buttock muscles (glutei), the leg muscles (quadriceps, hamstrings) and the upper thigh muscles (medial adductors). If you don’t know what exercises to do to maximize your workout, have no fear. The Bun and Thigh Roller includes physical programs for working out the muscles of the upper body as well! With the optional extension of Bun and Thigh Roller you can also work out your abs, chest and arms in a wide variety of exercises. Therefore, with the Bun and Thigh Roller, you can actually get a complete body workout!Bun and Thigh Roller can help you achieve the best results with minimal effort! The adjustable difficulty of the exercises provided by Bun and Thigh Roller makes the product suitable for both men and women, and for beginners to professional athletes! Thanks to its light mass and its revolutionary design, Bun and Thigh Roller can be easily manipulated and setup. This ease of use makes the Bun and Thigh Roller beneficial to people of all ages and sizes.Whether you are a beginner or a professional athlete, Bun and Thigh Roller can fully satisfy your requirements. You can choose from 8 progressive levels of difficulty, so you can do either perform a minimal workout or a very challenging physical exercise using your own body weight. At the low-difficulty level, you burn calories and shape your muscles easily. By increasing the difficulty level for your exercises, you can strengthen your body and build muscular mass.The Bun and Thigh Roller is ergonomically designed to isolate the neck and back, relieving the pressure on these tender points while you do your physical workout. Don’t hurt your back by doing old-fashioned exercises like sit-ups. Also, by isolating the regions of the back and neck, Bun and Thigh Roller helps you maintain correct posture during your workouts, improving the efficiency of your exercises. The Bun and Thigh Roller helps you achieve remarkable results in a very short period of time. Thousands of satisfied customers worldwide recommend this incredible product to anyone who wishes to maintain a beautiful, fit and healthy body.

By Adam Weiss of

tvproductshq.com

. Visit our store for more information about the

Bun and Thigh Roller

or any of our other popular As Seen on TV products.

Article Source:

Bun and Thigh Roller – Sculpt Your Body the Quick, Fun and Easy Way}

Bahrain Grand Prix cancelled amid political turmoil

Posted on May 29, 2021May 30, 2021Categories Uncategorized

Thursday, February 24, 2011

A week after Sunni and Shi’ite youth protesters marched on the capital city of Manama, the Bahrain government informed Formula One Management that it would withdraw from hosting the Bahrain Grand Prix. The decision was made in an effort to focus on the pressing national issues facing the country. Demonstrators, who are still holding Pearl Square, had threatened to target the Media attention if the event went ahead as scheduled. The race is the opening event of the 2011 Formula One racing season.

Bahrain’s Crown Prince, HRH Sheikh Salman bin Hamad al-Khalifa, sent a statement to Formula One Management which said, “At the present time the country’s entire attention is focused on building a new national dialogue for Bahrain. After the events of the past week, our nation’s priority is on overcoming tragedy, healing divisions and rediscovering the fabric that draws this country together; reminding the world of the very best that Bahrain is capable of as a nation once again united.”

The Bahrain Grand Prix was to be held on March 13, with teams coming in within the next few weeks to prepare for the race. Formula One president and CEO Bernie Ecclestone issued a public statement saying, “It is sad that Bahrain has had to withdraw from the race, we wish the whole nation well as they begin to heal their country.” Ecclestone also noted that despite reported rumors, the Bahrain International Circuit would not be charged for their cancellation of the event, citing that he considered the political unrest to be a “force majeure” and that the events that took place could not have been predicted. “What has happened in Bahrain is desperately sad but one month ago everyone was looking forward to the race,” he said. Formula One Management will most likely have to absorb the costs related to the canceled race, estimated at around $40 million, unless it can be re-scheduled later in the season.

With the announcement from the Crown Prince that political issues would be addressed, exiled Shi’ite political leader Hassan Mushaima announced that he would return to the country. Mushaima, leader of the Haq Movement opposition party, was tried in absentia in 2009, accused of attempting to overthrow the government. Other Haq Movement members have also been arrested in recent years, but received royal pardons. While 23 members of the political movement are currently awaiting trial, on Tuesday the Bahrain government released a group of political detainees without comment, meeting one of the demands of the protesters.

Retrieved from “https://en.wikinews.org/w/index.php?title=Bahrain_Grand_Prix_cancelled_amid_political_turmoil&oldid=4576620”

Ethics debate surrounds surgery to stunt disabled girl’s growth

Posted on May 28, 2021May 29, 2021Categories Uncategorized

Friday, January 5, 2007

An ethical controversy has surged in the United States and elsewhere around nine-year-old Ashley X (her family name has not been released). The disabled girl was operated upon at the request of her parents, to prevent her from growing, menstruating and developing breasts. The parents, who wish to remain anonymous, explain their situation on a blog entitled The “Ashley Treatment”. There have been over 1000 reactions on the blog so far.

Ashley suffers a condition termed static encephalopathy with marked global developmental deficits of unknown etiology, which means brain damage of unknown cause leading to a kind of static condition. She can make sounds, move her arms and kick her legs, but she cannot change her position, eat, walk, talk etc. Many of these children are in poor health and die young, but Ashley is in good health. For all of these functions she depends on her caregivers. Most of the day she passes watching her surrounding, lying on a pillow. Her parents call her their “Pillow Angel”, “since she is so sweet and stays right where we place her—usually on a pillow.”

Quote

Ashley can continue to delight in being held in our arms and will be moved and taken on trips more frequently and will have more exposure to activities and social gatherings.

-Ashley’s Mom and Dad

Ashley’s parents want to keep her at home and care for her themselves, and they want to guarantee their daughter’s quality of life. To this end, they say, Ashley underwent several surgical procedures and medical treatments during a period of three years. To attenuate her growth, Ashley was given high doses of the hormone estrogen. Ashley now measures 4ft 5 (1m 35cm) and weighs around 75 lbs (34 kg), which is below her expected length and weight. Her low body weight and size would improve her comfort, and at the same time facilitate the work of her caregivers.

Surgery to remove her uterus (a procedure called a hysterectomy) and breast buds were performed, so Ashley does not menstruate and will not develop breasts, both of which parents think only would cause her discomfort. Since high estrogen levels can cause menstrual bleeding and breast development, the surgery was also meant to limit these effects. She also underwent surgery to remove her appendix, because it would be difficult to diagnose appendicitis given Ashley’s low communication possibilities.

Retrieved from “https://en.wikinews.org/w/index.php?title=Ethics_debate_surrounds_surgery_to_stunt_disabled_girl%27s_growth&oldid=4579132”

Ontario Votes 2007: Interview with Green Party candidate Gordon Kubanek, Nepean Carleton

Posted on May 26, 2021May 27, 2021Categories Uncategorized

Tuesday, October 9, 2007

Gordon Kubanek is running for the Green Party of Ontario in the Ontario provincial election, in the Nepean-Carleton riding. Wikinews’ Nick Moreau interviewed him regarding his values, his experience, and his campaign.

Stay tuned for further interviews; every candidate from every party is eligible, and will be contacted. Expect interviews from Liberals, Progressive Conservatives, New Democratic Party members, Ontario Greens, as well as members from the Family Coalition, Freedom, Communist, Libertarian, and Confederation of Regions parties, as well as independents.

Retrieved from “https://en.wikinews.org/w/index.php?title=Ontario_Votes_2007:_Interview_with_Green_Party_candidate_Gordon_Kubanek,_Nepean_Carleton&oldid=888925”

Flood Fire And Water Damage Restoration And Repair In California

Posted on May 26, 2021May 27, 2021Categories Irrigation

Flooding, and the damage it causes building structures and home foundations, has become a greater problem today than in the past. Part of the problem can be attributed to the fact that more homes and commercial buildings are being built in areas prone to flooding. The 100 year flood plain has been expanded to account for frequent floods in various areas. In addition, excessive pumping of water from underground reservoirs has resulted in ground subsidence and contributed significantly to the expansion of the 100 year flood plain. And coastal areas of the United States have been hit my monster hurricanes and their flooding in the past decade.

Flooding can damage linoleum, carpeting, and tile floors so finding a reliable company that do flood damage repair in California is very important. The company that you contacted to do flood damage repair in California must know what it is doing. If the company that you called to do flood damage repair in your California home does not do its job properly, you will have to contend with problems like molds and mildew later. The company in flood damage repair in California you should choose is the one that has a wide experience in doing flood damage repair in Breckenridge and other areas with similar conditions.

[youtube]http://www.youtube.com/watch?v=sKkpiCKtJEY[/youtube]

As far as fire damage repair is concerned, they are certified and recognized by all major insurance companies. This can ease matters for you as well as speed things up. Their fire damage repair services include the initial assessment and evaluation of damage to all objects and particularly to the structure in question. They will get to work by immediately packing out all the other items in your home or premises, cleaning, deodorizing and packaging of clothes and other belongings as well as controlling the odor in the house.

Along with Flood and Fire damage, Water damage repairs are now trouble-free and achievable because of the status of the skill equipment that makes this feasible. Once you have water damage on your home, you need to take action for damage control as soon as you can. Water damage will transform in mold if it is left unrestrained. You have almost certainly smelled mold when you have been in shops with antiquities as well as in moist basements. What you may not understand is that a lot of these mold spores are poisonous. It is vital, consequently, that you take steps to do something about the water damage as soon as possible. As an alternative of replacing the assets that have been damaged, you can decide at the present on water damage repair from a water removal service.

We understand the financial burden and inconvenience that water damage in San Diego can cause and ensure you that we work faster more efficiently than any other home restoration business. If your home or business has experienced water damage in San Diego or you are worried that it will in the days to come, be sure to contact the licensed professional experts at Able Restoration for water damage services in San Diego.

Article Source: sooperarticles.com/home-improvement-articles/pest-control-articles/flood-fire-water-damage-restoration-repair-california-299153.html

About Author:

Mubin Khan,Technical head in La Damages provides services in Fire Damage Repair California,Flood damage and emergency plumbing. We also provide Flood Damage Los Angelesmold damage restoration services too.Author: Kalgi Shah

UK Chancellor of the Exchequer makes 2005 Budget speech

Posted on May 21, 2021May 22, 2021Categories Uncategorized

Wednesday, March 16, 2005

The United Kingdom Chancellor of the Exchequer, the Right Honourable Gordon Brown PC MP, in a speech to the British House of Commons today presented his ninth Budget, what is very likely to be his last Budget before the next UK General Election. This opened the parliamentary debate on the 2005 Finance Bill, and was followed by responses from the opposition parties.

In a 48 minute long speech, the Chancellor presented a Budget of “tax cuts that are reasonable, spending that is affordable, and [economic] stability that is paramount”, that was “the prudent course for Britain”. There were few surprises that had not already been indicated in his 2004 pre-Budget report. The increase in the threshold on stamp duty was greater than that forecast by commentators, as was the amount of the Council Tax rebate to households with pensioners.

Retrieved from “https://en.wikinews.org/w/index.php?title=UK_Chancellor_of_the_Exchequer_makes_2005_Budget_speech&oldid=3846456”

Choosing The Right Leather Work Gloves

Posted on May 20, 2021May 21, 2021Categories Earthmoving Machines

By Ray Roark

Comfort, dexterity, durability, flexibility, protection, and cost are the key considerations when choosing leather gloves for a specific job environment or as a general purpose work glove. A comparison of leather work glove material options, pattern variations, styles and applications will help you choose the most suitable glove.

Glove Leather Types and Quality

The type and quality of leather used are significant considerations in choosing leather work gloves. Gloves are manufactured primarily in cowhide, pigskin, goatskin, and deerskin, each offering unique characteristics specific to the animal.

Cowhide leather

is one of the most rugged and economical leathers used to manufacture gloves due to its availability, comfort, and durability. Specifically, cowhide is good for dexterity, durability, pliability, abrasion resistance, and puncture resistance. Cowhide is also very good in keeping hands warm, but is limited in the leather s breathability. Cowhide dries stiff when it gets wet, becoming hard and losing its flexibility.

Pigskin leather

is a soft and supple leather that is more porous, which makes a glove that is comfortable and resistant to moisture, but not quite as warm as cowhide. High lanolin content keeps this leather soft which does not dry out and crack after repeatedly getting wet. Pigskin is an economical alternative to cowhide, offering more dexterity and breathability with superior pliability. Pigskin leather is the most durable and provides the greatest abrasion resistance of cowhide, goatskin, and deerskin.

Goatskin leather

has the highest natural lanolin content, which makes a very soft and flexible glove that retains its pliability after getting wet. Goatskin offers the improved dexterity, pliability, and breathability of pigskin over cowhide, but does not offer the durability. Abrasion and puncture resistance are about the same as cowhide, while goatskin does not provide as much protection from the cold as cowhide.

Deerskin leather

is extremely soft and supple offering very good dexterity and excellent pliability. Deerskin gloves do not stiffen after getting wet repeatedly and form to the hand over time. Their flexibility also causes them to easily lose their shape with rough wear. Deerskin gloves are the best for comfort, but sacrifice durability, abrasion and puncture resistance. Deerskin glove breathability is limited, like cowhide, and they provide less protection from the cold, similar to goatskin and pigskin gloves.

Leather types are further classified by cuts or splits which offer different levels of quality.

Full-Grain leather

, also called

top-grain leather

, refers to the finest raw material including the outer waterproof skin which provides a thicker, more durable glove with greater abrasion and puncture resistance.

Split leather

is obtained by splitting the rougher interior side of the skin (drop split) from the supportive outer part (grain) yielding a softer and more pliable glove with greater dexterity. Split leather can be divided into 3 types, depending upon which part of the animal the hide is cut:

Side split leather is made by splitting the hide in half along the backbone and is the most durable and uniform split because of its high fiber density.

[youtube]http://www.youtube.com/watch?v=QXB9DUaVgCM[/youtube]

Shoulder split leather is taken from the neck and shoulder area of the animal and provides abrasion resistance in a more economical grade of leather.

Belly split leather is cut from the underside or belly of the animal and is less consistent in texture and appearance, but the most economical split leather.

Leather Work Glove Linings

Obviously, the lining of the glove is a big factor in hand comfort with a variety of options from no lining to synthetic and natural materials. The most popular leather work glove lining options are listed below:

3M Thinsulate utilizes extremely small fibers of polyester to provide one of the most effective insulation linings without the bulk of natural materials. Manufactured by 3M, it is breathable and retains its exceptional insulating ability in damp conditions.

Pile is synthetic wool that is very popular due to its low cost and similarity to wool.

Thermal linings are manufactured by creating a first layer overlapped by a second layer of material creating a heat insulation pocket between the layers.

Fleece is soft bulky napped cotton with a deep pile and is one of the most common glove liners.

Foam lining features a layer of foam insulation between cotton fleeced jersey and a layer of interlocked cotton.

Thermo lined gloves are thermal gloves with waterproof linings.

Wool linings are odor resistant and provide excellent warmth, even when wet.

Leather Work Glove Patterns

The most common construction for leather work glove styles is the Gunn pattern, but the Clute pattern offers an economical alternative:

Gunn pattern

is manufactured with fully wrapped fingers and thumbs, while the palm side is a separate glove pattern which is sewn at the base of the middle two fingers. This cut allows flexibility with the seam at the natural crease of the fingers and the seamless back affords greater comfort. The finger seams being away from the work area help the glove to last longer.

Clute pattern

refers to gloves with a roomy comfortable fit and seams along every finger and the thumb, down the back of the glove. The palm and bottom of the fingers is covered with one piece of material and no seams on the palm side of the glove.

Leather Work Glove Cuffs

Leather work gloves are available in a wide range of cuffs. Hemmed cuffs offer medium wrist protection; shirred and knit wrists prevent debris from getting into the glove, and safety and gauntlet cuffs offer maximum wrist and forearm protection:

Rolled hem or turned cuffs feature a narrowly rolled hem and create a very finished and clean look.

Hemmed cuffs may use color-coded fabric to hem the cuff of the glove.

Knit Wrist cuffs provide a snug fit to prevent debris or liquids from getting inside the glove.

Shirred cuffs use elastic to gather the glove around the wrist when worn, but not as tightly as the knit wrist.

Safety cuffs provide a higher degree of wrist and arm protection with large 2 ” cuffs. Safety cuffs are manufactured from a variety of materials and include: rubberized, plasticized, starched, denim, leather, and canvas cuffs.

Gauntlet cuffs are a larger form of the safety cuff and provide the highest level of wrist and arm protection with large 4 ” cuffs.

Leather Work Glove Thumb Types

Work gloves are manufactured using one of the following thumb types:

Keystone thumb is a type of thumb stitched separately to conform to the natural position of the thumb. The keystone thumb offers the greatest flexibility and comfort.

Wing thumb is manufactured with the thumb angled diagonally across the palm to improve comfort and natural movement without a seam between the thumb and palm area.

Straight thumb is manufactured with the thumb lying vertically straight from the wrist and is good for gripping.

Leather Work Glove Styles

Leather work gloves can be divided into three basic style groups:

Leather driving gloves

or drivers are one of the most rugged and comfortable work gloves made, featuring flexibility and abrasion, puncture, moisture, and heat resistance. Leather drivers are excellent in a variety of applications, including equipment operation, such as farm, construction, tractor-trailers, and forklifts. Leather drivers are also ideal for general purpose work environments requiring greater dexterity and flexibility, such as material handling, general industrial work, stamping, packaging, fabricating, lumber industry, chainsaw operation, automotive, mining, furniture industry, pipe fitting, assembly and other medium to heavy duty industrial applications.

Leather palm gloves

are one of the most popular and widely used work gloves because of their lower cost, abundance, and ability to handle a wide variety of general industry work applications, such as agricultural, automotive, gardening, construction, landscaping, parks and recreation, large material handling, oil rigging, refinery work, and other heavy industrial environments.

Welding gloves

or welders are a very heavy duty superior heat resistant leather work glove providing hand protection from metal splashes, flames, sparks and ultraviolet radiation for applications in welding, molten metal, and foundries.

Choosing the right leather work glove for you or your workers is simply a matter of understanding your options and their benefits. Leather work gloves offer durability, dexterity, flexibility, comfort and protection in a wide range of quality and costs to accommodate virtually every industrial job setting.

About the Author: Ray Roark is a fan of leather gloves and leather palm gloves. To review a complete selection of wholesale industrial gloves including Kevlar, string knit, terry cloth, cotton, gardening, disposable, nitrile, neoprene, rubber, vinyl, coated, latex, and wholesale

leather work gloves

visit

UnitedGlove.com

Source:

isnare.com

Permanent Link:

isnare.com/?aid=392020&ca=Advice